Artboard RECORE NC

Non-combustible lightweight composite panel

Made of

Recore NC panels consist of number of layers of foamed fiber composites compressed during high temperature into a laminate. It consists of a non-combustible silicate foam. Plate reinforced with fiberglass. The material composition gives the panel low weight, high stiffness, dimensional stability, non-combustibility.

Basic properties

Combines strength, low weight and non-combustibility in the same material.
Good rigidity, dimensional stability, low weight, good thermal insulation, and excellent fire properties, conduct a wi-fi and cellular signal, water resistant. Combines strength, low weight and fire safety in the same material. Recore Industries AB has certifications and product tests: including Railway EN 45545-2: 2015, Marine MED-B, MED-D from Det Norske Veritas (DNV) and ISO 9001:2015.

Used as

Partition walls, tables, doors, ventilation and air ducts and any types of finishing elements, incl. floors with HPL & aluminum surface. Recore NC is perfect suitable as a core board for sandwich construction. Recore panels can be covered with different types of materials: metal (aluminum), HPL, nylon flock, fiberglass, veneer etc. for achieving anti scratch resistance, for decorative and for other purposes.

 
 

Artboard RECORE NC

Non-combustible lightweight composite panel

Made of

Recore NC panels consist of number of layers of foamed fiber composites compressed during high temperature into a laminate. It consists of a non-combustible silicate foam. Plate reinforced with fiberglass. The material composition gives the panel low weight, high stiffness, dimensional stability, non-combustibility.

Basic properties

Combines strength, low weight and non-combustibility in the same material.
Good rigidity, dimensional stability, low weight, good thermal insulation, and excellent fire properties, conduct a wi-fi and cellular signal, water resistant. Combines strength, low weight and fire safety in the same material. Recore Industries AB has certifications and product tests: including Railway EN 45545-2: 2015, Marine MED-B, MED-D from Det Norske Veritas (DNV) and ISO 9001:2015.

Used as

Partition walls, tables, doors, ventilation and air ducts and any types of finishing elements, incl. floors with HPL & aluminum surface. Recore NC is perfect suitable as a core board for sandwich construction. Recore panels can be covered with different types of materials: metal (aluminum), HPL, nylon flock, fiberglass, veneer etc. for achieving anti scratch resistance, for decorative and for other purposes.

Unique qualities of product

Lightweight structures

Non-combustible

Water resistance

High dimensional stability

Conduct Wi-Fi and cellular signals, EMI/RFI

Sound and noise isolation

Low thermal conductivity

Good compression strength

Easy to aplly

Reach, European union regulation for production and use of chemical substances

Unique qualities of product

Lightweight structures

Non-combustible

Water resistance

High dimensional stability

Conduct Wi-Fi and cellular signals, EMI/RFI

Sound and noise isolation

Easy to aplly

Reach, European union regulation for production and use of chemical substances

Low thermal conductivity

Good compression strength

Specification

Dimension mm 2440×1220
Density kgm3 ~ 220
Thickness mm 6, 8, 10, 12, 15, 18, 20

Recore Industries AB reservs the right to make necessary product changes at any time. Technical specifications are thus stated subject to change. Information is current for January 2020

Typical properties Standard Unit P220
Density (nominal) ISO 845 kgm3 220
Density tolerance +/- 10%   kgm3 meet / 198~244
Flexural modulus ISO 844 MPa 900-1355
Flexural strength ISO 844 MPa approx. 4,21
Compressive stress (10%) ISO 844 MPa 1
Compressive modulus ISO 844 MPa approx. 17,5
Thermal conductivity ISO 8301 Wm1K1 0,039-0,040
Fire properties DIN 5510 R(Railway) S4SR2ST2
  EN 45545-3 R(Railway) EI 15, E30, EW30
  IMO FTPC Part 3
IMO A 754 (18)
M (Marine) B15
  IMO A799 M (Marine)  
Noise reduction ISO 140-3 dB approx. 24
Area weight   kgm2 4,8

Artboard AB reservs the right to make necessary product changes at any time. Technical specifications are thus stated subject to change. Information is current for January 2020

Several different possibilities can be suitable for shaping Artboard RECORE materials

  • Milling or drilling
  • Water jet cutting
  • Laser cutting
  • Punching
  • Gluing

Artboard panel joint, mounting and fixing

Artboard panels can be covered with different types of materials: metal (aluminum), HPL, nylon flock, fiberglass, veneer etc. for achieving anti scratch resistance, for decorative and for other purposes.

Veneer

Fiberglass fabric

Nylon flock covered by e.g. alcantara

Paper fabrics

Aluminium sheet

Laminated plastic, e.g. melamine

Plastic film, e.g. PVC

HPL

Links

Other products

RECORE P

Lightweight and fire-resistant phenolic composite panel

Partition walls, tables, doors, ventilation and air ducts and any types of finishing elements, incl. floors with HPL & aluminum surface.

Read more

RECORE
Molded Parts

Lightweight and fire-resistant customized elements for air ducts and interior

We produced individually on request molded parts — prefabricated elements for air ducts and interior parts: wall cladding, air ducts and curved elements of ceilings and corners for railway, marine and automotive industries.

Read more

RECORE
Light Floor

Lightweight and stabile floor for passenger safety and comfort

Recore Light Floor is perfect suitable as a floor for railway, metro and tram cars, automotive solutions (busses, motorhomes, campers, electric vehicles) and for ships and vessels. Recore Light Floor is lightweight, excellent vibration resistance and can be a part of a floor heating system.

Read more

RECORE P

Lightweight and fire-resistant phenolic composite panel

Partition walls, tables, doors, ventilation and air ducts and any types of finishing elements, incl. floors with HPL & aluminum surface.

Read more

RECORE
Molded Parts

Lightweight and fire-resistant customized elements for air ducts and interior

We produced individually on request molded parts — prefabricated elements for air ducts and interior parts: wall cladding, air ducts and curved elements of ceilings and corners for railway, marine and automotive industries.

Read more

RECORE
Light Floor

Lightweight and stabile floor for passenger safety and comfort

Recore Light Floor is perfect suitable as a floor for railway, metro and tram cars, automotive solutions (busses, motorhomes, campers, electric vehicles) and for ships and vessels. Recore Light Floor is lightweight, excellent vibration resistance and can be a part of a floor heating system.

Read more